Posts By Doris Richardson

Can a home inspection detect asbestos?

California requires all persons to be licensed by EPA to identify or disclose asbestos. Because they have been licensed with the EPA, certain inspectors are able to perform asbestos testing. This designation is not available to all inspectors. Testing for asbestos is often beyond the expertise of home inspectors due to the requirements of special licensing.

Check the licensing status of an asbestos tester if they are a home inspector.

In most cases, asbestos testing should be requested before the property inspection begins. However, it can also be requested if inspectors notice areas that may be of concern.

Asbestos can be found in buildings and structures constructed before 1978. It is more common than it was before 1978. Although asbestos is still used extensively, it can still be found within structures that were built after 1978.

It is strongly recommended that an asbestos inspector/contractor be licensed to further inspect houses and structures built in this era.

Best Mold & Mildew Removal Products

The Difference Between Mold & Mildew

While most people mistakenly use the terms mildew and mold interchangeably, there are two types of fungi. Mildew is found on top of surfaces. It appears flat and has a growth pattern that resembles a spilled or splash-like color. Mold typically grows in circular patterns that rise above the surface. Mold can “through” material and have a slightly fuzzy appearance.

Mildew is more damaging than mold. Because it only grows on the surfaces, mildew is usually easier to eradicate than mold. Mildew is usually removed by using a mildew-removing cleaner and some elbow grease. Mold can also cause irreparable damage to the materials that it grows on. Because mold grows beyond the surface, it is difficult to remove completely by wiping away.

Mold and Mildew Removers: Hard Surfaces

These materials include porcelain and ceramic tile, plastic, metal, glass, and fiberglass. These materials are non porous which means they will not allow water, air, or any other fluids to pass through them.

A solution of chlorine bleach and warm water is ideal for these surfaces. For hard surfaces, you can also use antimicrobial cleaners. These cleaners can often be more effective than bleach, and are available at most home improvement stores. RMR and Concrobium brand products, such as RMR141, RMR86, and Mold Control, are the best. These products can be used right out of the container and do not require any scrubbing.

Mold and Mildew Removers: Porous surfaces

Porous surfaces are porous. Fluids and air can pass through porous surfaces. These surfaces are also well-suited for the RMR products mentioned above. Mold must be removed carefully from porous surfaces. Mold can grow through porous materials, such as concrete, drywall, wood, and drywall. (Yes, concrete is porous so water can pass through concrete at any time. Professional mold remediators recommend the replacement of porous materials. You can’t see into the wall or material affected by mold, so how can you ensure that it is gone?

Mold and Mildew Removers

RMR-86
RMR-141
Concrobium mold control
ProRestore Mediclean Disinfectant spray
Benefect Botanical Desinfectant (from plant extractions with no warnings)
EcoClean Solutions Lemocide

Help with Mold Removal

You should take care when cleaning up mold or mildew contaminated materials. It is very easy for mold and mildew spores spread to other parts of your home. 

Most mold remediation involves special training and the use of equipment to safely remove mildew and mold from homes. Sometimes it’s best to hire professionals.

Popcorn Ceilings With Mold

Popcorn ceiling removal can be difficult. A popcorn finish is a rough texture with uneven edges that is similar to cottage cheese. This was very popular in the 1970’s. The finish could be sprayed and effectively covered seam lines and any blemishes. It was brightly colored when new and was said to have great acoustical characteristics.

Homeowners and buyers today are not fond of popcorn ceilings. They collect dust and don’t reflect the natural light very well. Many popcorn-ceiling finishes are made with asbestos. Even though you can still find popcorn ceilings in newly constructed homes, there are not many textured ceilings.

What is Mold?

  • Mold isn’t dust or dirt.
  • Ordinary cleaning chemicals or detergents won’t remove mold.
  • You shouldn’t try to just sweep it up or brush away.
  • According to many “experts”, chlorine bleach is 98% liquid and should not be used for the purpose of removing mold from porous surfaces like popcorn ceilings. The chemical chlorine will not penetrate the surface and the chlorine bleach’s water will provide the mold with the moisture it needs to survive.
  • In biblical times, mold was not cleaned by people. However, they were given instructions to do so. These days, mold must be physically removed.
  • What kind of mold is this? It doesn’t really matter what type of mold it might be. You must get it removed.

Mold’s Common Health Dangers

Exposure to mold spores or mold allergens can cause allergic reactions, inflammation in the lungs, pain and swelling, as well as sinus infections. Mold-related illnesses are more common in those with conditions such as asthma or emphysema. Chemotherapy patients should avoid any contact of mold. Anyone can be affected.

Talk to your doctor if mold exposure has caused you health problems. Your doctor can run allergy tests or other tests to diagnose the problem and prescribe treatment. To ensure your full recovery, you must clean up any moldy areas in your home.

Popcorn Ceiling Mold Removal

Protect yourself by dressing properly before starting any mold removal job. Protect your eyes with rubber gloves or latex, as well as rubber gloves and disposable covers. To avoid inhaling mold spores, a N95 respirator or mask should be worn. Mold spores, which are easily dispersed when disturbed, can easily become airborne.

If possible, open windows and use fans to ventilate the affected spaces. Do not open doors to areas affected. You can also create containment to prevent accidental cross-contamination. You can seal the heat registers with 6-mil polyethylene and tape.

Spray bottles and pump-up garden-like sprayers are good options for antimicrobial cleaners. Use bleach sparingly! Antimicrobial cleaners are available in a variety of products and can be found at most hardware or home improvement stores. White vinegar is a good option if you have sensitive skin.

Spray the cleaning solution onto your ceiling. Let the cleaning solution sit for at least 30 minutes. It can be wiped away with a damp cloth. You should never re-dip an old cloth into clean water. This can cause water contamination. If you’re lucky enough, the mold will have been removed.

This might not work

Mold roots are porous and can grow into and through porous materials. You might think that mold is gone, but it may reappear just a few more days later. Your hard work has been wasted. The mold was growing deeper than on the ceiling’s surface.

You should physically remove mold instead of trying to clean it. This would involve completely removing affected drywall. Before the drywall can be removed, it must be cut out and bagged. Mold removal is not as simple as it appears. It is best to call a professional for help if you have a mold problem.

A certified mold remediates can deal with all types of residential mold problems. They know how to remove mold correctly the first time, and they are familiar with your safety procedures.

You Can Stay in Your Home during Mold Remediation

Is the entire house affected? Are you still able to use your kitchen and one bathroom? Is mold only in one area? Can you avoid using that room during removal? There are several things to think about before you decide to keep your house.

  1. Is your HVAC system at risk?
  2. It’s About to Get Loud! Is the noise coming from the contractor’s machine going to get on your nerves!
  3. How much remediation is needed?
  4. Sensitivity issues could be the deciding factor. What chemicals will be used to remediate the problem?
  5. Home environment can be affected by repairs and reconstruction.

Mold remediation can be dangerous work. You must understand all aspects of the process. You might not be able to see all the molds.

Mold Bomb Fogger Review: Does it work?

First, we want to inform you that mold in homes isn’t something you do alone. According to a study on residential houses in America, 33% are affected or have mildew. It is estimated that the U.S. has more than 138 millions residential homes. That’s more than 45,000,000 homes that have a mold problem like yours.

Mold and Your Family’s Health

Most people are familiar with the horror stories of mold problems in homes. Some of the stories have some truth to them. Mold can cause allergies, asthma, skin and eye irritations, and even allergic reactions. Mold can be dangerous because you don’t know what type of mold may be in your home. The danger of mold exposure is especially dangerous for children and seniors. It is important to immediately remove mold from your home if you discover it.

Mold Foggers

Mold foggers generally kill mold and moldspores. Because these products act as foggers, they can reach places where other mold-killing products might be too difficult to reach. Bio-Cide Laboratories Mold Bomb doesn’t make exception.

The best thing to do is place this fogger where you think you have mold problems. Multiple bombs will be needed if you have mold problems in more than one part of your home. Evacuate pets and everyone from the house. Once everyone is out, press the tab on the fogger and you can walk away. The fogger should have finished its job within two hours and the mold should no longer exist.

End of story? No!

It may appear that the mold is dead, but it is not gone. You will still see visible mold when your walls, ceilings and floors are cleaned up after fogging. It’s not gone. The fogging agent, or the mist of chemicals, works just like a rainstorm.

You will notice how fresh and clean the air appears when you first step outside after a gentle rainfall. It’s because the rain “washed” the atmosphere, collecting all pollutants and pulling them to earth. Mold foggers do exactly this. It pulls out any mold spores that are floating in the atmosphere and collects them. Even though the spores might be dead, they will still be present in your house. Research shows that even though the spores have died, dead mold can still cause problems. Dead mold spores contain allergens as well as toxins.

There is no shortcut

While mold doesn’t necessarily need to be removed from your home, it does need to be cleaned up. Do you see any mold under the carpet? Is active mold still present somewhere else? It is not dead. This is a poor attempt to reduce mold hazards in your home.

Mold Remediation In Minneapolis

What is the best time for a mold inspection in Minneapolis to be contacted?

To properly remove mold from your home, commercial or industrial building surfaces, it is advisable to contact a mold specialists in Minneapolis. If you are trying to solve the mold issues yourself, professional mold removal companies can help. They provide thorough cleaning for all surfaces. They provide the latest solutions, including highly trained staff and methods to effectively clean mold.

Minneapolis mold inspections offer services to remove mold from the roots. Minneapolis mold removal experts are highly-trained professionals can provide mold solutions.

The best mold inspectors in Minneapolis should have expertise in cleaning up mold on different surfaces. They should be equipped with the most current technology for mold prevention and cleaning.

The best mold inspectors in Minneapolis are experienced in the removal and cleaning of mold from any type surface. This includes tiles and grout, concrete floors or carpets. A Minneapolis mold inspector use proven mold removal methods to ensure that mold is permanently removed and does not return.

Mold Remediation In Kansas City

What is the right time to call a professional Kansas City mold inspector company?

When you find mold on the surfaces of your home or commercial buildings, it is best to call for a mold specialists in Kansas City. The best mold inspectors in Kansas City will provide clear and professional cleaning for all surfaces in your home. They use the latest techniques and employ trained personnel to clean mold securely and convincingly. Kansas City mold removal experts offer services that will stop mold from returning to roots.

Mold inspectors in Kansas City that are professional and well-trained should be available at all hours of the day to come and help you out.

Kansas City mold inspections should have extensive experience with removing mold from different surfaces. They should use the most recent technology in mold prevention and cleaning.

A mold inspection in Kansas City expert in the removal of mold from any surface, such as tiles, grout, concrete floors, carpets and other areas of your home. A mold inspector in Kansas City will employ mold removing methods that are proven as safe and skillfully to remove permanent mold from your home and keep it away from returning.

Mold Remediation In Chicago

When is the best time to hire a professional Chicago mold insecptor?

If you notice mold growing on your walls, floors or in other areas of your house or business building, it is a good idea to get a Chicago mold inspections to come and check it out. The best Chicago Mold remediation companies can provide thorough and thorough cleaning services for your entire home. They are equipped with the most up-to-date tools and have trained personnel with the best methods to remove mold quickly and effectively.

The best mold inspectors in Chicago provide services to prevent mold growth and ensure that mold does not return. Mold specialists in Chicago are expertly trained mold professionals.

Mold inspectors in Chicago must have extensive experience in removing and destroying mold from various surfaces. They should have the most up-to-date technology and mold prevention and cleaning methods.

Chicago mold removal experts have extensive experience in cleaning mold from all types of surfaces, including tiles, grout, concrete floors and carpets. They use mold-removal solutions that have been proven to be safe and effective in order to permanently remove mold and prevent it from coming back. If you think you have mold, get in contact for a mold inspection in Chicago.

Mold Stains On Clothes: How To Remove Mold Stains From Clothes

When clothing is left wet or damp for long periods of time, it can cause mold stains. This is especially true when clothing is stored somewhere warm and dark like in a hamper or closet. It is best to wash clothing immediately after food spillages. Staining from mold is most common in clothes made of wool, cotton, and other natural fibers.

There are several steps you can take if mold or stains have already established. It is best to avoid allowing mold or stains to stay on your clothes for too long.

Mold-Stained Clothing: Where do you start?

First, take the clothes out of your home. Take the clothes outside, and then brush away as much mold as possible. You can use an old toothbrush to do this. However, you should protect your hands using nitrile gloves. This will prevent mold spores and mildew from spreading throughout your house. Close to mold-stained clothing should be removed and air dried. These areas should be cleaned with antimicrobial products if clothes were kept on a wardrobe shelf or in a closet. Warning: EPA states that chlorine bleach does not make a good product to clean or kill mold on porous surfaces.

All clothing that has been contaminated or affected by mold should be exposed to the sun for at least one day. The majority of mold on clothing can be killed by sunlight. Molds aren’t like plants. They are unable to photosynthesise sunlight and will most likely die from ultraviolet radiation.

Mold Stains on Clothing

After mold removal, mold stains are likely to remain. To get rid of any staining, you can pre-soak your clothes in cold water and then wash them with hot soapy water. Rewash the item if any stains are still present. You can try to remove the stain with mild bleach.

Use a mixture of lemon juice and salt to prevent color fading. Rinse the garment immediately with cold water. The stained area should be rinsed with water. Apply the lemon juice directly to the stain. Use a little bit of Kosher salt to rub the lemon juice onto the fabric. Apply more lemon juice to the stain. Hang the clothes in the sun to dry. You will need to wash the fabric again once it is dry. The lemon juice can make the fabric stiffer.

You can clean your clothes with oxygen bleach in hotwater to remove unsightly, darker mold stains. Usually, oxygen bleach comes in powder form. It is composed of natural soda crystals, hydrogen peroxide and sodium percarbonate. The chemical reaction that occurs when oxygen is added to water causes it to release oxygen. As they travel through the water, oxygen bubbles break down dirt and odors.

Mix the oxygen bleach with hot water. Place the stained clothes in the water and stir. Let the clothes soak for 30 minutes. After removing the clothing, squeeze out as much water as you can. Don’t try to pull the fabric out by twisting it. Hot water is required to wash the clothes. Add 1/4 cup of laundry detergent, and 1-1/4 cups of white vinegar. Run the machine for a full cycle. After the cycle is completed, hang the clothes out in the sun to dry.

Commercial Products to Remove Stains

There are currently no products that can remove mold stains from clothing. Although there are many products that can remove mold stains from building materials, none are specifically made for fabrics. Although some people believe that chlorine bleach can be used to remove mold stains from construction materials, the EPA does not recommend bleaching fabrics or porous surfaces.

You can use a bathroom mildew cleaner to remove the stain or throw out the clothing. This is not a good option as it can bleach the clothing. If the process does not lift the entire color, some lightening may occur. It may also cause a hole in your garment. You should test this product by using a Q-tip to apply a small amount on the inside seam. You can continue if the color does not fade in a few minutes. Spray the product directly on the item or use a Q-tip or cotton ball to apply the stain.

White Mold On Houseplants: Houseplants With White Dusty Mold – Solution

Sclerotinia, a white, dusty mold, is what is commonly found on fruits and vegetables, as well as houseplants. It is also known as stem rot and crown rot. This mold affects many plants and is widespread on many continents.

White mold can be very dangerous to plants during their growth cycles. White mold can live for a long time in soil and spread quickly from one plant to another. It can also spread to harvested crops in storage facilities. It can affect many different plants, but its favourite plants are soybeans and green beans.

Identification of white mold

Sometimes white mold can be confused with efflorescence. This is a crystalline salt-like growth that occurs on concrete and mortar. Water moves through concrete and masonry, bringing with it unbounded minerals. The water leaves behind a fluffy white substance when it evaporates. The odor of the white substance and the water test can help you distinguish them. Spray water on efflorescence to cause it to disintegrate. White mold won’t. White mold will not. Efflorescence won’t grow on wood or plants.

It is difficult to tell the difference between different types of mold by their color. This requires mold testing. However, you can rule out certain types by using color. Stachybotrys, Chaetomium and Chaetomium almost always have dark colors.

White Mold Common Locations

After a water loss, white mold can often be seen growing on furniture. White mold is also attracted to leather and textiles. The good news is that white mold can be removed from clothing without permanently staining it.

White mold can also be found in high humidity areas, but not necessarily complete saturation. This is why you will find white mold in attics with sheathing or on the bottom of crawlspaces or basements’ subflooring.

Houseplants can be a great way of purifying the air inside your home. However, they can become a problem if they develop white mold. White mold can occur from poor care, overwatering, and lack of sunlight.

White Mold is Dangerous

Allergies can be caused by molds in many places. You should not consider any area with significant mold growth in your attic, basement, or inside your home safe. No matter the color, it is important to properly identify the cause and remediate the mold.

The allergens and irritants in molds can cause health issues in people who are sensitive. These reactions may occur immediately or over a longer time. These adverse health effects include:

  • Asthma attacks
  • Sneezing
  • Coughing
  • Headaches
  • Eye, nose, or throat irritation
  • Fatigue
  • Skin rashes
  • Breathing difficulties

How to Remove White Mold from Your Home

Depending on the material, there may be slightly different methods or treatments for eliminating white mold.

  • Upholstery-vacuum, then use a mixture of alcohol and water to clean the area. Dry the area with a second wipe.
  • Wood surfaces-vacuum, then wipe with an antimicrobial, rinse and dry immediately.
  • Clothing –vacuum. After vacuuming, wash with non-chlorine bleach. Rinse and then wash as usual.
  • Drywall-always remove moldy drywall. Mold can grow deep into drywall due to its porous nature and cannot be removed completely.

How to Remove White Mold from Houseplants

  1. Repot the plant with high-quality potting dirt if the mold has reached the pot. After removing any mold, let the soil dry before you water again. You can add a natural antifungal product such as cinnamon, baking soda, and apple cider vinegar to the soil. They won’t harm the plant. Make sure the pot is free from dead or decaying leaves.
  2. Identify the current state of the mold. It is considered dormant if it is pale in color and is powdery. It is active if the mold appears soft and fuzzy. To avoid cross-contamination, take the plant outside. To remove the mold from the leaves of the plant, use a damp paper towel. You should not use the same towel twice. Always use a different paper towel for each wipe. If mold remains, you need to remove it by cutting off the stem. Spray the plant with a fungicide from a garden store and then move it inside to bright sunlight.

White mold can be prevented from damaging your houseplants by repotting them as soon as you bring them home. White mold spores or white mold may have already infected the soil. The new plant should receive plenty of sunlight and movement. Water your plants only when absolutely necessary. To check if the soil is dry, you can touch it. Regularly trim the dead and dead parts of the plant, as well as any dead leaves, from the pot.

When cleaning up mold or coming in contact with it, always wear protective clothing, eye protection and nitrile gloves.

Mold On Plaster: Is It Possible For Mold To Grow On Plaster?

Plaster is not an ideal food source for mold growth. It is not a food source for mold. Plaster is not porous, meaning it isn’t permeable to water or air. It is also non-organic. Plaster is made from a lime or clay-based base, and it is very similar in appearance to concrete. However, you will not see mold on plaster walls. This simply means that mold isn’t growing due to the plaster.

Plaster Mold – What to Do?

Mold can be seen on plaster walls. Mold can be seen on plaster walls when it is digesting and eating the plaster. It could be paint or organic dust particles. Or it could grow through cracks in plaster and consume whatever is behind it.

Older homes built in the 1930s or earlier had plaster mixed with wood lath and then nailed to the studs. If the plaster is still intact on the walls of your home from this time, you may have wooden lath. This wooden lath is susceptible to mold growth.

From the 1930’s to World War II, construction industry shifted towards prefabrication like plywood and special drywall. This drywall product was sometimes called “button board” and was typically 2’x4′ in size. These drywall prefab products had a paper backing on both sides. They were similar to today’s drywall. Although there is plaster on top of the drywall, mold can still grow on the paper backing.

Mold can grow on plaster walls if they are painted with latex paint. However, most people assume the mold is growing on plaster. Latex is an organic material, and organic materials can be a nutrient to mold.

It might not be mold

It’s possible that the mold you see is not mold. Instead, it could be efflorescence. Efflorescence refers to a crystallized, salt-like substance that forms on concrete, plaster, and masonry (plaster might not be porous, but water can still pass through cracks and gaps). Water moves through these materials and brings along unbounded salts. The water evaporates leaving behind a fluffy white substance. The odor of the efflorescence or mold can be used to distinguish them. While efflorescence smells musty, efflorescence is not. A simple water test can be done. Spray water on efflorescence and it will start to dissolve. Mold will not. Efflorescence does not grow on wood or other wooden materials.

Mold Exposure: Dangerous

Mold is nature’s method of eliminating dead (or non-viable) organic material, whether they are plants or animals. Mold can be found both indoors and out. Mold is not usually a problem unless you have a particular allergy to mold or mold spores. Mold can cause health problems in your home and indoors if it reaches high levels.

Mold can come into your home in many ways. Mold can get into your home through your clothing, shoes, windows and doors, as well as your pets and plants. Mold spores will not grow if they land near food or moisture sources. Mold will grow and expand if the conditions are right.

According to the CDC, mold exposure can lead to many health problems.

  • Stuffy nose
  • Eye irritation
  • Skin rashes
  • Allergy reactions
  • Asthma in children
  • Chronic lung disease
  • Breathing difficulties
  • Coughing
  • Fatigue

Plaster Mold Removal

Mold can be very dangerous so protective clothing is essential. Safety and safety of your family should always come first.

Your furnace or air conditioner should be turned off. Cover cold air returns and heat registers with plastic. This will keep any mold spores that have been contaminated from getting into your HVAC system. You can also close the door to let the mold out of one room. To transport mold spores outside, you can blow a fan out of the window.

Warm water and antimicrobial cleaning products should be added to a bucket. As many disposable rags you can gather. Ring the rag with a wet rag. Use the wet rag to scrub the affected area. Place the rag in a bag to catch dirt and make a new one. Never double-dip! You should continue scrubbing until the mold is gone.

Use a fresh bucket of water to rinse the entire room. This will collect any mold spores which have become airborne in the cleaning process. All rags and bags that you have used should be thrown out.

Use a fan to air dry the walls for at minimum 24 hours. Close the doors and windows.